5 Reasons Why Infrared Heaters Are Cost-Effective [User Manual Included]

Infrared heaters are working by emitting wavelengths to certain directions. It is also commonly referred to as the heater that warms your body directly. Most importantly, you have probably heard a lot about infrared heaters as cost-effective compared to other heaters.

Here are the five reasons why infrared heaters are cost-effective in heating you up!

Reason 1: Zero Heat Loss

Ceramic heaters, fan heaters, kerosene heaters, and others radiate warmth by warming up the area around them first. If you want to warm up quickly, you have to be pretty close to the source of the heater and warm yourself up by rubbing your hands and facing them to the heater.

But infrared heaters radiate heat straight to your body. They don’t try to warm up the area around them and waste energy by doing. The heat is immediately absorbed into the body.

Reason 2: No Need to Preheat

When other heaters need moments to bring the heat up, you don’t need to do that with an infrared heater. It works by radiating warmth immediately towards objects in front of it. If you are standing in front of your heater, you will warm almost immediately.

This is a big advantage against many other heaters. Manufacturers might be saying how efficient their heaters are, but infrared heaters are especially efficient without wasting a single second or any energy just to get itself running.

Reason 3: No Fuel Needed

Natural gas and common types of fuel have prices that are pretty volatile. They can fluctuate, and resources are always limited. While an infrared heater only relies on electricity and you can easily operate it whenever you want without having to refill it with fuel.

Installing solar panels is one way to generate electricity through sunlight. You don’t have to pay for sunlight! You don’t have to pay for sunlight! Installing panels for your home would take a lot of time and effort so it would be best to seek help from a commercial roofer or solar panel installers.

Reason 4: Heats UpExactly What You Need

An infrared heater radiates warmth at only a particular direction. It does not warm the air around it but straight to the objects that are in front of it. Thus, it is also that type of heater that heats up exactly the amount of area it has promised. Just make sure to have it face the direction you want.

Reason 5: No Major Maintenance

No need to change the wick, no need to buy fuel, no need to remove the cover and wipe the fan. Just make sure it’s running like how it’s supposed to be. You only need to keep it dusted and be sure that there isn’t anything blocking its path.

Effective Ways of Using an Infrared Heater

If you want to make sure that you are effective in using your infrared heater, you also need to know the right way to use it.


Make sure you read our tips below when you plan to get a new infrared heater this winter!

Get a Thermostat: Your heater must be equipped with a thermostat. This is an essential part that will let you know how hot your heater is running at. A thermostat gives the owner the freedom to set it from light mode to warm and cozy heat during the harshest winter.

Most heaters today come with a thermostat that you can adjust by using a remote control that comes with it. Some can be done manually, but the best ones let you set it with as small as a 1-degree increment.

Keep it Clean: A good heater is only good if you give enough care to maintain its condition. One of the biggest enemies to heaters is dust which is, unfortunately, good insulators. They keep heat from escaping, causing your heater to overheat while you don’t get the same warmth you used to feel when you first used it.

Dust it after summer before using it and make sure that it is not concealed or covered by other objects, especially in front of it.

Smell anything? Sees anything burning?

Stop using it immediately! This is a safety tip that we always remind everyone. Your heater should not be making any burning smell or look as if it has awful black traces of being burnt. Its sides are not supposed to be melting down, and if it has a cool-to-touch exterior, that should stay cool.

Infrared heaters are also known to make no sound as it doesn’t use a fan to spread heat (unless it is one that works with a fan. Make sure yours is not making any weird sound that is not supposed to be there.